Home Categories Send inquiry

SD-RS-SA2 Embedded Reflector Solar Road Stud


Solar Road Stud also know as cat eyes,can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers. The solar system of solar stud lights is conducive for reducing environmental impact and saving costs. With more than 15 years of factory experience, solar powered cats eyes produced by our company have competitive cats eye road markers price and offers more choice to global traffic road safety market and trustworthy partners all over the world.

Working Principle of Solar Road Stud Light

During the day, solar panels absorb sunlight and convert solar energy into electrical energy, which is stored in energy storage devices (batteries or capacitors). At night, the electrical energy in the energy storage devices is automatically converted into light energy (controlled by photoelectric switches) and emitted by LEDs. Bright light outlines the road and induces the driver's sight. Solar road studs will starts automatically to flash when night falls or with the onset of inclement weather .The bright flashing LEDs are highly effective at getting the attention of drivers much earlier than conventional road studs.

Product Name Wistron Solar Road Stud
Item No. HT-RS-SA2
Solar panel 2.5V/120mA
Battery 1.2V/600mAh NI-Mh battery
Working Model Flashing or Steady
LEDs 6pcs super brightness Φ5mm LEDs
Color Yellow,Red,Blue,Green,White
Visual Range more than 800meters
Controlling light intensity 400-500Lux
Working temperature -20℃~+80℃
Waterproof IP68
Working Time More than 200hours for flashing model,72 hours for steady
Lifetime 3- 5 years
Compress Resistance >20T
Size 122*104*23mm
Material Aluminum+PC+PMMA reflector
Carton Size 54*28*26cm
N.W/G.W 21.8/23.5KG

Solar road stud are packed by box,2pcs/box,30 boxes per carton,we can also packed the road stud as your request,such as by pallet

Solar Road Stud Installation Step

To install Solar Road Studs safely, it is of utmost importance to secure the workers and the street safely!

1. Mark the proper position for the solar road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry. 
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
5. After 4 hours of installation, the glue will dry completely.
6. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.


On the highway, please install the solar road studs every 5 to 8 meters.
On the ordinary roads, please install it every 3 to 5 meters.
On the Parking Lot, Garden or Dangerous Zone,pls install road stud every 0.5-2 meters

The distance between of each solar road stud also according to the actual application requirements.


SD-RS-SA2 Embedded Reflector Solar Road Stud Related Video: